Load Cell Cables & Wiring
Professional Cable Solutions for Precision Weighing Systems
Reliable weight readings start with reliable connections. Artech’s shielded, twisted-pair load cell cables protect low-level measurement signals from electrical noise, ensuring stable, accurate readings across your entire weighing system. Proper cable selection and grounding preserve calibration and extend equipment life, even in demanding industrial environments.
Standard Cable Options
All Artech cables feature 22 gauge conductors with various jacket and shielding options to meet different environmental and performance requirements.
4-Conductor Cables
CI-4 - PVC Jacket, 4 Conductor
- Jacket Material: PVC (Polyvinyl Chloride)
- Conductors: 4 x 22 AWG
- Shielding: Mylar shield with drain wire
- Minimum Order: 100′ Roll
CII-4 - Poly Jacket, 4 Conductor
- Jacket Material: Polyurethane
- Conductors: 4 x 22 AWG
- Shielding: Mylar shield with drain wire
- Minimum Order: 100′ Roll
- Applications: More demanding environments
CIII-4 - Poly Jacket, Braid Shield
- Jacket Material: Polyurethane
- Conductors: 4 x 22 AWG
- Shielding: Braided shield with drain wire
- Minimum Order: 100′ Roll
- Features: Enhanced mechanical protection
6-Conductor Cables
CI-6 - PVC Jacket, 6 Conductor
- Jacket Material: PVC (Polyvinyl Chloride)
- Conductors: 6 x 22 AWG
- Shielding: Mylar shield with drain wire
- Minimum Order: 100′ Roll
CII-6 - Poly Jacket, 6 Conductor
- Jacket Material: Polyurethane
- Conductors: 6 x 22 AWG
- Shielding: Mylar shield with drain wire
- Minimum Order: 100′ Roll
- Applications: Multi-channel with enhanced protection
CIII-6 - Poly Jacket, Braid Shield
- Jacket Material: Polyurethane
- Conductors: 6 x 22 AWG
- Shielding: Braided shield with drain wire
- Minimum Order: 100′ Roll
- Features: Maximum durability for harsh environments
Special Cable Options: Consult factory for Special & Teflon Cables
Cable Selection Guide
Jacket Material Comparison
PVC (Polyvinyl Chloride)
- Advantages: Softer, more flexible, easier to work with
- Applications: Indoor installations, moderate environments
- Temperature Range: Standard operating conditions
Polyurethane (Poly)
- Advantages: Stiffer construction, superior chemical resistance
- Applications: Corrosive environments, abrasive conditions, outdoor installations
- Durability: Enhanced resistance to oils, chemicals, and physical abuse
Shielding Options Comparison
Mylar Shielding
- RFI Protection: ~100% effectiveness against radio frequency interference
- Construction: Foil wrap with drain wire
- Coverage: Complete, uniform protection
- Applications: Electrically noisy environments, precision applications
Braided Shielding
- RFI Protection: ~85% effectiveness against radio frequency interference
- Construction: Woven wire mesh
- Durability: Superior mechanical protection
- Applications: High-flex applications, areas with physical stress
Installation Best Practices
Cable Routing
- Avoid running load cell cables parallel to power cables
- Maintain minimum 6″ separation from AC power lines
- Use dedicated conduits for load cell wiring when possible
- Secure cables to prevent stress at connection points
Environmental Considerations
- Seal all cable entry points against moisture
- Use appropriate strain reliefs at junction boxes
- Protect cables from sharp edges and abrasion
- Consider UV protection for outdoor installations
Electrical Considerations
- Use proper grounding techniques
- Avoid splicing cables when possible
- Use shielded junction boxes for connections
- Follow manufacturer’s impedance matching requirements
Pro Tip: Cable selection is critical for system performance. Consider environmental conditions, electrical noise levels, and mechanical stress when choosing the appropriate cable type.
Standard Wiring Configurations
4-Conductor Standard (Most Common)
Red (+): Excitation positive input
Black (-): Excitation negative input
Green (+): Signal positive output
White (-): Signal negative output
6-Conductor Configuration
Red (+): Excitation positive input
Black (-): Excitation negative input
Green (+): Signal positive output
White (-): Signal negative output
Yellow: Remote sense positive
Blue: Remote sense negative
Ordering Information
| CABLE TYPE | CONDUCTORS | JACKET | SHIELDING |
|---|---|---|---|
| CI-4 | 4 x 22 AWG | PVC | Mylar + Drain |
| CI-6 | 6 x 22 AWG | PVC | Mylar + Drain |
| CII-4 | 4 x 22 AWG | Polyurethane | Mylar + Drain |
| CII-6 | 6 x 22 AWG | Polyurethane | Mylar + Drain |
| CIII-4 | 4 x 22 AWG | Polyurethane | Braided + Drain |
| CIII-6 | 6 x 22 AWG | Polyurethane | Braided + Drain |
Discount Structure & Options
- Volume Discounts: Based upon total footage ordered
- Special Lengths: Custom lengths available per order
- Custom Configurations: Special requirements accommodated
- Standard Lengths Available:
- Integral Cables: 20 feet standard (with load cells)
- Separate Cables: Custom lengths per specification
- Junction Cables: Various lengths for summation boxes
Contact Us for Technical Support
Our factory team can assist with volume pricing, special configurations, or technical guidance to ensure the right cable selection for your application.
NEED HELP?